Laser Marking Systems

Benefits

Fiber Laser Systems, LLC has Laser Markers starting at $29,950.00. Look to laser marking, etching and engraving processes for the following part design benefits:

• Low cost setup compared to chemical etching, pad printing or silk screening.
• Ultra permanent marks compared to pad printing, silk screening and rubber stamping.
• Serialization capabilities like no other.
• 2D Matrix Codes
• UID Matrix Codes
• Barcodes (all types)
• CNC computer controlled quick repeatable marks.
• Little to no surface deformation as compared to dot peening or letter stamping.
• Non-contact marking, etching and engraving.
• Ability to mark on flat or unusually shaped items with little to no distortion.
• Equally suited to low and high volume marking, etching and engraving applications.
   

Fiber Laser Marking System

2 Station Dial Index Fiber Laser Marking System

Automated Semiconductor Package Laser Marking System

The laser scanning head consists of two high speed servo controlled galvanometer mirrors for scanning the laser beam in an XY motion and a flat field focusing lens. The mirrors deflect the beam to provide a constant velocity along the engraved path of the graphic. The flat field lens provides for a flat focus plane over the entire lens field.

Laser Marking Head with a 4" Field Size

There are several lens systems that can produce different scanning field sizes. 4", 5" and 10" scanning fields are generally used, with the smaller fields providing a smaller focal spot size and thus a more detailed graphic mark.

20-Watt Air Cooled Fiber Laser

Laser Specifications

• Up to 1mJ Energy Per Pulse
• Q-Switched Fiber Laser With Pulse Energy - 80 to 100ns Pulse Duration
• Excellent Beam Quality (M2 < 1.05)
• 20 to 80 kHz Repetition Rate
• 1064 -1080 nm Center Wavelength
• Fiber Delivery - Fiber Outputs With Integrated Beam Expander and optical isolator
• Up to 30% Wall-Plug Efficiency
• Maintenance Free Operation - 50,000 to 100,000 Hours MTBF
• Compact Rugged Air-Cooled Package
• Sealed Optical Path From Laser to Scan Head
• Custom Specifications are also Available
• No alignment required
• Takes 110 Volts standard plug.
• Laser draws only 300 watts.
• 2 year warranty on laser

Minimum Fiber Laser Marking System

• Q-Switched Fiber Laser
• Scanning Head.
• F-Theta Lens With 160 mm Focal Length
• Scan Head Power Supply
• Industrial PC Based Laser Controller
• Mounting Hardware and Cables
• Optical Fiber cable 3 meters
• WaveRunner Software
• I/O extension board

Dual Fiber Laser Marker (Component Level)