Call 940-231-5752 or Email








 Contact Us


Small Laser Engraving and Cutting Machine


Small Laser Engraving and Cutting Machine


FLS-6040 Laser System


  • Laser-type : Sealed CO2 laser tube  
  • Laser power: 40W (special order for 60W) 
  • Machine Enclosure dimensions: 1170Tall x 800Deep x 1100Wide mm 
  • Machine Enclosure dimensions: 46Tall x 31.5Deep x 43.5Wide inch 
  • Crated weight with accessories: ~750 pounds 
  • Engraving area: 23.62 x 15.74 inch (600 x 400 mm) 
  • Modified Engraving area: 25.00 x 17.13 inch (635 x 435mm) 
  • Motorized Worktable with about 10 inches of usable height 
  • Engraving speed: 0-60,000mm/min 
  • Max cutting speed: 0-36,000mm/min 
  • Laser output control: 1-100% software setting 
  • Location precision: less than 0.01mm 
  • Highest scanning precision: 50-1000DPI 
  • Working voltage: 110VAC 50-60Hz 
  • Operating temperature: 0-45 degree 
  • Operating humidity: 5- 95% non condensing 
  • Minimum shaping character: English 1.0 x 1.0mm 
  • Graphic format supported: BMP, JPG, GIF, HPGL, NC, PLT, DST, DXF, and AI 
  • Driving system: micro divided stepper 
  • Cooling mode: water-cooling and protection system 
  • Auxiliary equipments : Exhaust-fans, air-exhaust pipe 
  • Controlling software : LaserCut 5.3 and DSP control system. 
  • Compatible Software : TAJIMA , CorelDraw, AutoCAD, Photoshop 
  • Color separation: yes


Laser System Control Software

Laser Control Software 

Main features:


  • Seamless connection with CorelDraw and AutoCAD makes the operation much easier.  
  • Supports data formats such as AI, BMP, PLT, DXF, DST  
  • After graphic & image data being downloaded, the system can be used to carry out simple editing (such as zooming, rotating, reproducing and so on)
  • The software can hierarchically output data and easily set the output power, output speed and output mode (engrave, cut, and so on) and automatically save the defined parameters of every layer.  
  • The software can engrave the image, scribe, or cut and engrave the vector diagram with precision.  
  • The software supports array output and can automatically distribute the array to the entire worktable. The software can also display output effect through analog output. The origin location can be defined at random to facilitate processing.  
  • Pause and Continue are available during output and all output control operations can be directly connected to the operational control panel for easy operation.
  • The software provides a frame-tracing function during output so as to easily find the laser beam location.
  • Engraving speed can reach 1500mm/s, curve cutting speed can reach 500mm/s and engraving precision can resolve 0.1mm.
  • 360 degree slope engraving. The slope can be freely set and there is no limitation of speed (subject to the laser processing depth).  
  • High processing speed of large data files & graphics. Data of 15M or less can be processed almost instantaniously.  
  • Constant laser processing power during high-speed cutting ensures consistent processing depth.  
  • Optimized Cutting path. Customers are provided with various path optimization methods.   
  • Unique breakpoint processing function ensures that no rejected product will be produced even when power is suddenly cut.  
  • Advanced Synchronous Tracking Control Ensures that synchronous changes of the laser power and the speed of laser head while in motion.
  • Advanced PWM (Pulse-Width Modulated) Control Implement 360 degree slope engraving easily, increase the real-time capability in adjusting the laser power.  
  • No distortion in high speed cutting of circles.





Get a Quote

Laser Videos

Laser Engraved Guns