Fiber Laser Systems, LLC
121 Alexandra Woods Drive
Debary, FL 32713
940-231-5752
www.FLS-US.Com
|
|
|
| Laser
Cutting Systems Largest Low Cost Laser Cutting and Engraving System available anywhere!!! Take full advantage of this system for your laser cutting and engraving applications and boost your business to a new level of capability. Prices starting at $24,875.00 for a 24" x 48" XY travel with 65 watts of Laser Power...... Model #C65-2448
Very Large 24" X 48" Work Area ! Honeycomb Cutting Bed Included ! High Output 65 Watt CO2 Laser ! Vacuum Exhaust System Included ! Beam Combiner Included ! Higher Power Lasers Available... In both CO2 and Advanced Fiber Longer Travels Available...Up to 5' x 10'
Laser Cutting System Specification Laser Type: Sealed CO2 Laser "Usable" Work Area: 48" x 24" (1218mm x 609mm) Max. Working Piece (W
x D x Thick): 48" x 24" x 1" (Up to 8” depth with Honeycomb Removed…) Overall Dimensions (W x D x H): 60" x 40" x 43" (1524mm x 1016mm x 1092mm) Honeycomb Size: 48" x 24" x 2” (1218mm x 609mm x 50.8mm) Drives: Vexta Precision Steppers in “Micro-Stepping” mode Cutting Speed Control: Adjustable from 0.01 to 20 inch/sec with up to 10 colors linked speed setting per job Engraving Speed Control: Adjustable from 1% to 100% with up to 10 colors linked speed setting per job Power Control: Adjustable from 1% to 100% with up to 10 colors linked power setting per job Z Axis Adjustment: Precision machined slide Resolution (dpi): 1000, 800, 600, 400, 200 Computer Interface: PCI Interface Board Supplied Computer Requirements: Windows XP, 1.6 GHZ Processor or Higher, 512 MB Ram or Higher, Spare PCI Slot Software Interface: System installs as a Printer Driver and Prints Directly from Corel Draw or AutoCAD Cooling: Water Cooled: 2 Liters/Minute Power: 100 - 240 VAC, 10-20 Amp
This FLS fiber laser system is the best laser system for cutting metals. The higher beam quality of fiber lasers over CO2 and Nd:Yag lasers make it ideal for cutting faster with a narrower kerf and better quality cut edges. Model #F500-52100
Large 52" X 100" Work Area ! Cutting Bed Included ! High Power 500 Watt Fiber Laser ! Vacuum Exhaust System Included ! Higher Power Fiber Lasers Available... 1KW, 2KW, 5KW Longer Travels Available...Up to 5' x 10'
Laser Cutting System Specification Laser Type: Fiber Laser "Usable" Work Area: 52" x 100" Max. Working Piece (W x D x Thick): 48" x 96" x 6" Drives: Vexta Precision Steppers in “Micro-Stepping” mode Cutting Speed Control: Adjustable from 10 to 700 inches per minute Power Control: Adjustable from 1% to 100% with up to 10 colors linked power setting per job Z Axis Adjustment: 8" Precision machined slide Repeatability: 0.005" Computer Interface: PCI Interface Board Supplied Computer Requirements: Windows XP, 1.6 GHZ Processor or Higher, 512 MB Ram or Higher, Spare PCI Slot Software Interface: System installs as a Printer Driver and Prints Directly from Corel Draw or AutoCAD Cooling: Water Cooled: (Optional Chiller) Power: 220 VAC, 30 Amp
|
Informational Links
|
|
Fiber Laser Systems, LLC |
