|
Benefits
Laser Marking Systems starting at $29,950.00. Look to laser marking, etching and engraving processes
for the following part design benefits:
- Low cost setup compared to chemical etching, pad
printing or silk screening.
- Ultra permanent marks compared to pad printing, silk
screening and rubber stamping.
- Serialization capabilities like no other.
- 2D Matrix Codes
- UID Matrix Codes
- Barcodes (all types)
- CNC computer controlled quick repeatable marks.
- Little to no surface deformation as compared to dot
peening or letter stamping.
- Non-contact marking, etching and engraving.
- Ability to mark on flat or unusually shaped items with
little to no distortion.
- Equally suited to low and high volume marking, etching
and engraving applications.
Fiber Laser Marking System
2 Station Dial Index Fiber Laser Marking System
The laser scanning head consists of two high speed servo
controlled galvanometer mirrors for scanning the laser beam in an XY motion and
a flat field focusing lens. The mirrors deflect the beam to provide a constant
velocity along the engraved path of the graphic. The flat field lens provides
for a flat focus plane over the entire lens field.
Laser Marking Head with a 4" Field Size
There are several lens systems that can produce different scanning field
sizes. 4", 5" and 10" scanning fields are generally used, with the smaller fields
providing a smaller focal spot size and thus a more detailed graphic mark.
20-Watt Air Cooled Fiber Laser
Laser Specifications
- Up to 1mJ Energy Per Pulse
- Q-Switched Fiber Laser With Pulse Energy - 80 to 100ns Pulse Duration
- Excellent Beam Quality (M2 < 1.05)
- 20 to 80 kHz Repetition Rate
- 1064 -1080 nm Center Wavelength
- Fiber Delivery - Fiber Outputs With Integrated Beam Expander and optical
isolator
- Up to 30% Wall-Plug Efficiency
- Maintenance Free Operation - 50,000 to 100,000 Hours MTBF
- Compact Rugged Air-Cooled Package
- Sealed Optical Path From Laser to Scan Head
- Custom Specifications are also Available
- No alignment required
- Takes 110 Volts standard plug.
- Laser draws only 300 watts.
- 2 year warranty on laser
Minimum Fiber Laser Marking System
- Q-Switched Fiber Laser
- Scanning Head.
- F-Theta Lens With 160 mm Focal Length
- Scan Head Power Supply
- Industrial PC Based Laser Controller
- Mounting Hardware and Cables
- Optical Fiber cable 3 meters
- WaveRunner Software
- I/O extension board
| 
